Difference between revisions of "SERVICES"

From MaxCard
Jump to: navigation, search
Line 1: Line 1:
Personalization of a card is made when it is necessary for it to bear any unique information regarding the owner, product or service which it offers.  The personalization makes every card unique and binds it with the bearer, for example badges, cards for loyal customers, business cards, or with the system for which it is intended – promotion cards, cards for discounts and many others. The possibilities for personalizations are many – electronic personalization, barcode, picture, name, emboss and many others.
+
 
  
  

Revision as of 13:18, 25 June 2015


Thermal transfer print

Thermal transfer print

Technology for printing of cards at which the image is put on the card as is taken by special stripe. If the image is full-color then are used stripes with the four colors basic for the printing - cyan (C), magenta (M), yellow (Y) and black (K) - CMYK. The thermal printing is made with sublimation printers. It is used for printing on the cards of: serial or casual numbers and codes, names, barcodes, which may be as stansard as well as the more popular QR codes. We may personalize as all widespread formats of barcodes as well as a huge variety of more rarely met as: Bookland, DAFT Code, DOD Logmars, DUN-14, DUNS, EAN-128 (GS1-128), EAN-13, EAN-13 (with 2 or 5 Digits Add-On), EAN-14, EAN-18, EAN-8, EAN-8 (with 2 or 5 Digits Add-On), EAN-8 with 5 Digits Add-On, FIN Code, Flattermarken, GS1-128, GTIN, HIBC, I-2/5, ISBN Code (ISBN 13), ISBT-128 etc.




Digital print

HP Indigo

The digital offset print is used for making small circulations of cards – up to 3000 pieces. In this case the cards are personalized at the same time with the printing of static image. They may be personalized as with numbers, barcodes, names - as well as with color photos. It is used at making badges, ID cards, discounts or loyalty cards. A great advantage of such personalization is that it allows better data protection of scratching and scrubbing as everything stays under the protective layer of laminate. This guarantees better durability of the personalized data.





Embossed personalisation

Embossed personalisation software

The process of embossed deformation of the plastic cards with characters and digits – compulsory at the credit and debit cards. It is realized by specialized machines /embossers/ on strictly defined places. The embossing is made with alphanumeric symbols on Cyrilic or in Latin. At the emboss-printing is typical that may be available only lowercase letters, while the digits are lower and larger. Usually the so received inscription is colored with silver, golden or other color by tipper. It is 2 types: emboss (convex symbols with silvery or golder cover) and infill (symbols upset in the card surface).






Electronic personalisation

Matica

It is used when the card has electronic information carrier what is the magnetic stripe, contact or contactless chip. The magnetic stripe of the cards is usually placed on one and the same place no matter of the card type. Its place is fixed on 4 mm of the upper edge of the card. The width of the strip is not strictly determined but in practice is established width from 12,5 mm. to 13mm. At the contactless chips is possible the numbering of chips to be set in a separate file or to be printed on the card itself.





Standard packaging

Standard packaging

There are used paper boxes for 100, 250 or 500 cards. The boxes themselves are put into cardboard boxes for 1000, 2000 or 3000 cards. The cardboard boxes on their side are disposed on pallets and are additionally packed with nylon, “stretch” foil and hard cardbox corners for protection of moisture and mechanical damage.






Packaging on demand

Packaging on demand

It is possible for us to pack the cards in paper boxes with different number (20, 50, 60 etc.), depending on customer`s requirements. This type of packaging is subject to additional agreement with the customer as type and price.







Removable labels

Removable labels

Personalized information on easily removable labels sticked on the card for example at promotional packagings. When the card is presented together with leaflet or other type of promotional packaging and is necessary part of the personalized information to stay at the seller are used removable labels. They contain the personalized information most frequently in the form of barcodes and are sticked on the card.






Individual packaging and mailing

Individual packaging and mailing

It includes different types of individual packages. For example packaging of each card separately in cellophane bag. In this way the cards stay optinmally protected by scratching until their final arrival at the end customer. The cards may be also packed separately in promotional box, envelope or sticked on brochure. The package may be printed with design given by the customer. This type of packaging is subject to additional agreement with the customer as type and price.